Programming Board MAX32625PICO

19.40

1.8 V, 3.3 V, 32 bit, I2C, SPI, UART, USB

Saadaval järeltellimisel

Tootekood: 411 Kategooria:

Kirjeldus

The MAX32625PICO board is a rapid development platform designed to help engineers quickly imple- ment designs with the MAX32625 ARM® Cortex®-M4 microcontroller with FPU. The board also includes the MAX14750 PMIC to provide all the needed voltages. The form factor is a small: 0.6in x 1.0in dual-row header footprint that is compatible with breadboards and can also be soldered down SMT to another board. The board includes a 10-pin ARM Cortex debug connector so that it can be used as a DAPLink adapter. Additionally, on board are an RGB indicator LED and pushbutton. This provides a power-optimized flexible platform for quick proofs-of- concept and early software development to enhance time to market.
The MAX32625PICO board ships with a DAPLink image loaded that provides the USB Mass Storage Device (MSD) drag-and-drop programming, USB Communications Device Class (CDC) virtual serial port, and Human Interface Device (HID) CMSIS-DAP interface used by the mbed site. This allows the board to be connected to another target platform to enable the full mbed experi- ence. The microcontroller is also programmed with a bootloader allowing the DAPLink image to be updated or replaced with your own application code.
Get started developing on this board by going to this link: http://developer.mbed.org/platforms/MAX32625PICO.

Specification:
Ultra-Compact Development Platform:
0.6in x 1.0in, 20-Pin DIP Footprint
Cortex Debug Connector (Host)
20 Digital I/O, 4 Analog Inputs
3.3V and 1.8V Supplies

MAX326325 Microcontroller Features:
ARM Cortex-M4 Microcontroller with FPU, 96MHz
512KB Flash Memory
160KB SRAM
8KB Instruction Cache
Full-Speed USB 2.0
Three SPI Masters, One Slave
Two I2C Masters, One Slave
Three UARTs
1-Wire Master
40 GPIOs
Four Input 10-Bit ADC

MAX14750 PMIC:
Micro IQ 3.3V Buck-Boost Regulator
Micro IQ 1.8V Buck Regulators
Micro IQ 1.2V Linear Regulators
High-Side Load Switch

Expansion Connections:
Breadboard-Compatible Headers
SMT-Compatible Footprint
10-Pin Cortex Debug Header
Micro USB Connector

Integrated Peripherals:
RGB Indicator LED
User Pushbutton

MAXDAP Programming Adapter:
DAPLink Over Cortex Debug Cable
Drag-and-Drop Programming
CMSIS-DAP SWD Debugger
USB Virtual UART

Lisainfo

Kaal 101.3 g
Mõõtmed 10 × 15.7 × 4.5 cm

Arvustused

Tooteülevaateid veel ei ole.

Arvustust saavad kirjutada ainult need sisseloginud kasutajad, kes on antud toote ostnud.