Servo Continuous Rotation DS04-NFC

11.70

4.8 – 6 V, 0.22 sec/60 C, 5.5 kg/cm

3 laos (saab järeltellida)

Tootekood: 389 Kategooria:

Kirjeldus

To enter a 50 Hz square wave signal output terminals, and high pulse duration control signal cycle time can control the speed and reversing stall. A high pulse duration corresponds to a speed. High for 1 ms to 1.5 ms, steering gear forward (1 ms forward the fastest, the slower the closer to 1.5 ms, 1.5 ms servo stall), high servo reverse 1.5 ms to 2 ms (1.5 ms servo stall, the closer the faster the speed of the reversal of 2 ms, 2 ms, the fastest reversal).The steering gear with a median adjustment potentiometer (open shell to pry the circuit board to see), debugging can be high pulse is set at 1.5 ms to observe the steering gear stall, if you stop and turn on the regulation potentiometer until the stall so far, so the zero.

Specification:
Dimensions: 40.8 x 20 x 39.5 mm
Torque: 5.5 kg/cm (at 4.8 V)
Speed: 0.22 sec/60 C (at 4.8 V)
Operating voltage: 4.8-6 V
Operating temperature: 0-60 C
Current: <1000mA                                              

Lisainfo

Kaal 51.2 g
Mõõtmed 6 × 8 × 2.5 cm

Arvustused

Tooteülevaateid veel ei ole.

Arvustust saavad kirjutada ainult need sisseloginud kasutajad, kes on antud toote ostnud.