Shift Register, Serial to Parallel


74HC595, 1 Element, 8 bit, DIP, 16 Pins

Saadaval järeltellimisel

Tootekood: 97 Kategooria:


The SN74HC595N device contain an 8 bit serial in, parallel out shift register that feeds an 8 bit D type storage register. The storage register has parallel 3 state outputs. Separate clocks are provided for both the shift and storage register.

The shift register has a direct overriding clear (SRCLR) input, serial (SER) input, and serial outputs for cascading. When the output-enable (OE) input is high, the outputs are in the high-impedance state. Both the shift register clock (SRCLK) and storage register clock (RCLK) are positive-edge triggered. If both clocks are connected together, the shift register always is one clock pulse ahead of the storage register.

8 bit serial-in, parallel-out shift
Wide operating voltage range of 2V to 6V
High current 3 state outputs can drive up To 15 LSTTL loads
Low power consumption: 80µA max
±6-mA output drive at 5V
Low input current: 1µA max
Shift register has direct clear

Logic Family / Base Number: 74HC595
Shift Register Function: Serial to Parallel
No. of Elements: 1 Element
No. of Bits Per Element: 8bit
Logic Case Style: DIP
No. of Pins: 16Pins
Supply Voltage Min: 2V
Supply Voltage Max: 6V

IC Output Type: Tri State
Logic IC Family: 74HC
Logic IC Base Number: 74595
Operating Temperature Min: -40°C
Operating Temperature Max: 85°C


Kaal 1 g
Mõõtmed 1.5 × 3 × 1 cm


Tooteülevaateid veel ei ole.

Arvustust saavad kirjutada ainult need sisseloginud kasutajad, kes on antud toote ostnud.