Sodaq Explorer RN2483A

115.10

ATSAMD21J18, 32-Bit ARM Cortex M0+, 3.3 V

1 laos (saab järeltellida)

Tootekood: 74 Kategooria:

Kirjeldus

The ExpLoRer is a development/evaluation tool intended for the evaluation of Microchip wireless modules in a Research and Development laboratory environment. It is not a Finished Appliance. Manufacturers who integrate ExpLoRer in a Finished Appliance product must take responsibility to follow regulatory guidelines, for example for CE marking.

Atmel SAMD21, 32 bits Arm Cortex M0 microcontroller
Microchip RN2483A OR RN2903 LoRa module
Microchip RN4871 Bluetooth 4.2 module (BLE) with ceramic antenna
Atmel ATECC508A1 crypto chip to securely store your LoRa keys.
Atmel SST25PF040C serial flash chip (4Mbit)
MCP 73831 Charge controller and on-board rechargeable coin cell battery
embedded (PCB) LoRa antenna
MCP97001 temperature sensor
RGB LED
Micro USB Connector

Microcontroller: ATSAMD21J18, 32-Bit ARM Cortex M0+
Compatibility: Arduino M0 Compatible
Size: 93 x 55 mm
Operating Voltage: 3.3V
I/O Pins: 20
Analog Output Pin: 10-bit DAC
External Interrupts: Available on all pins
DC Current per I/O pin: 7 mA
Flash Memory: 256 KB and  4MB (external flash)
SRAM: 32KB
EEPROM: Up to 16KB by emulation
Clock Speed: 48 MHz
Power: 5V USB power and/or 3.7 LiPo battery
Charging: Solar charge controller, up to 500mA charge current
LED: RGB LED, Blue LED
LoRa: Microchip RN2483A Module
Bluetooth: Microchip RN4871 Module
Cyptochip: ATECC508A
Temperature sensor: MCP9700AT
USB: MicroUSB Port

Lisainfo

Kaal 46.3 g
Mõõtmed 8 × 11.5 × 2.5 cm

Arvustused

Tooteülevaateid veel ei ole.

Arvustust saavad kirjutada ainult need sisseloginud kasutajad, kes on antud toote ostnud.