SparkFun IR Thermometer Evaluation Board


ATMega328, 8 MHz, 3 V

1 laos (saab järeltellida)

Tootekood: 90 Kategooria:


This is an evaluation board for the MLX90614 IR Thermometer. The sensor is connected to an ATmega328 running at 3.3V with a STK500 (Arduino) 8MHz bootloader. Code can be loaded through the FTDI basic interface and the Arduino environment.
The MLX9061 sensor is a high precision, small size, single zone IR thermometer with an optional SMBus (two-wire) or PWM interface. The ATMega328 comes with demo code that gives a temperature readout in degrees F at 38400bps. You can use a 3.3V FTDI Basic to connect to the board.
This revision corrects the silkscreen error on the FTDI header. We’ve also added pull-up resistors to the I2C lines.

ATMega328 w/ 8MHz STK500 (Arduino) bootloader
MLX90614 IR sensor, 3V version
Power and status LEDs


Kaal 3.7 g
Mõõtmed 2.5 × 3.5 × 1 cm


Tooteülevaateid veel ei ole.

Arvustust saavad kirjutada ainult need sisseloginud kasutajad, kes on antud toote ostnud.