Raspberry Pi Zero Power Supply

Kirjeldus

Official power supply to power the Raspberry Pi Zero V2 and any Raspbery Pi model that features a micro USB connector. This power supply is supplied with a 2-pin plug connector for EU use.

Specification:
Output:
Output voltage: +5.1V DC
Minimum load current: 0.0A
Nominal load current: 2.5A
Maximum power: 12.5W
Load regulation: ±5%
Line regulation: ±2%
Ripple & noise: 120mVp-p
Rise time: 100ms maximum to regulation limits for DC outputs
Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
Protection: Short circuit protection. Overcurrent protection
Efficiency: 80.73% minimum (output current from 100%, 75%, 50%, 25%)
Output cable: 1.5m 18AWG
Output connector: micro USB
Input:
Voltage range: 100–240Vac (rated). 96–264Vac (operating)
Frequency: 50/60Hz ±3Hz
Current: 0.5A maximum
Power consumption (no load): 0.075W maximum
Inrush current: No damage shall occur and the input fuse shall not blow